+Article 33 Notification of a personal data breach to the supervisory authority

Article 33 Notification of a personal data breach to the supervisory authority

Article 33

Notification of a personal data breach to the supervisory authority

1.  
In the case of a personal data breach, the controller shall without undue delay and, where feasible, not later than 72 hours after having become aware of it, notify the personal data breach to the supervisory authority competent in accordance with Article 55, unless the personal data breach is unlikely to result in a risk to the rights and freedoms of natural persons. Where the notification to the supervisory authority is not made within 72 hours, it shall be accompanied by reasons for the delay.
2.  
The processor shall notify the controller without undue delay after becoming aware of a personal data breach.
3.  

The notification referred to in paragraph 1 shall at least:

(a) 

describe the nature of the personal data breach including where possible, the categories and approximate number of data subjects concerned and the categories and approximate number of personal data records concerned;

(b) 

communicate the name and contact details of the data protection officer or other contact point where more information can be obtained;

(c) 

describe the likely consequences of the personal data breach;

(d) 

describe the measures taken or proposed to be taken by the controller to address the personal data breach, including, where appropriate, measures to mitigate its possible adverse effects.

4.  
Where, and in so far as, it is not possible to provide the information at the same time, the information may be provided in phases without undue further delay.
5.  
The controller shall document any personal data breaches, comprising the facts relating to the personal data breach, its effects and the remedial action taken. That documentation shall enable the supervisory authority to verify compliance with this Article.

1. Overview

Summary Regulation

1.1 References

1.2 Identified Requirements

1.3 Related Standards

2. Identified Requirements

Requirements
Source Requirement

3. Related Standards

Standards
Source Requirement
SCF Data Breach

Description

Mechanisms exist to address data breaches, or other incidents involving the unauthorized disclosure of sensitive or regulated data, according to applicable laws, regulations and contractual obligations.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Incident Response Plan (IRP)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Incident Response Plan (IRP)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Integrated Incident Response Program (IIRP)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Integrated Incident Response Program (IIRP)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Integrated Incident Response Program (IIRP)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards, procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software, etc.).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to address data breaches, or other incidents involving the unauthorized disclosure of sensitive or regulated data, according to applicable laws, regulations and contractual obligations.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Situational Awareness For Incidents

Description

Mechanisms exist to document, monitor and report the status of cybersecurity and data protection incidents to internal stakeholders all the way through the resolution of the incident.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Basic incident response plan
∙ Designate incident response contact

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Documented incident response plan
∙ Incident log
∙ Designated IR team

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Formal incident response program
∙ IR playbooks
∙ Tabletop exercises

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Enterprise incident response program
∙ 24/7 SOC monitoring
∙ SOAR platform

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise SOC with SIEM/SOAR (e.g., Splunk SOAR, Palo Alto XSOAR)
∙ IR retainer
∙ Threat hunting

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards, procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software, etc.).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to document, monitor and report the status of cybersecurity and data protection incidents to internal stakeholders all the way through the resolution of the incident.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Cyber Incident Reporting for Sensitive / Regulated Data

Description

Mechanisms exist to report sensitive/regulated data incidents in a timely manner.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Incident Response Plan (IRP)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Incident Response Plan (IRP)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Incident Response (IRO) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with IRO domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Incident response-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ IT and/or cybersecurity personnel use an informal process to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards, procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software, etc.).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to report sensitive/regulated data incidents in a timely manner.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
Impressum German English